Internal Oiling-manufacture,factory,supplier from China

The automatic oiling device for the internal thread of the steel pipe is characterized in that thread oil is conveyed into an oiling head through a servo quantitative oil filling pump system, and the oiling head rotates at a high speed to atomize and spray the thread oil on the internal thread of a matching coupling of the steel pipe. It can automatically match the amount of grease according to the specifications of steel pipes, which greatly saves the amount of grease.

Internal OilingDevice   Description/ Instruction:The automatic oiling device for the internal thread of the steel pipe is characterized in that thread oil is conveyed into an oiling head through a servo quantitative oil filling pump system, and the oiling head rotates at a high speed to atomize and spray the thread oil on the internal thread of a matching coupling of the steel pipe. It can automatically match the amount of grease according to the specifications of steel pipes, which greatly saves the amount of grease.

In the off-line oiling device, the thread oil is delivered to the oiling head through the oil filling pump, and the oiling head rotates at a high speed to atomize and spray the thread oil on the internal thread of the matching coupling.DSTY-7/13/20L"Coupling specification: 7 ""/13""/20 "";Maximum speed of oiling head: 6000rpm."

Internal Water BlowingThe special air knife technology is used to make the compressed air evenly and annularly spray on the surface of the steel pipe thread, so as to blow off the emulsion and scrap iron on the surface of the internal or external thread, and it is equipped with a waste water recovery device.

Coupling Offline OilingIn the off-line oiling device, the thread oil is delivered to the oiling head through the oil filling pump, and the oiling head rotates at a high speed to atomize and spray the thread oil on the internal thread of the matching coupling.

The special air knife technology is used to make the compressed air evenly and annularly spray on the surface of the steel pipe thread, so as to blow off the emulsion and scrap iron on the surface of the internal or external thread, and it is equipped with a waste water recovery device.DSCS-7/13/20NSteel pipe specification: 7 ""/13 ""/20 ""

The automatic oiling device for the external thread of the steel pipe is characterized in that the thread oil is conveyed into a spray gun through a servo quantitative oil filling pump system, and the spray gun atomizes and sprays the thread oil on the external thread of the steel pipe with the help of compressed air, so that the amount of grease can be automatically matched according to the specification of a steel pipe, and the amount of grease is greatly saved.

External OilingDevice    Description/Instruction:   The automatic oiling device for the external thread of the steel pipe is characterized in that the thread oil is conveyed into a spray gun through a servo quantitative oil filling pump system, and the spray gun atomizes and sprays the thread oil on the external thread of the steel pipe with the help of compressed air, so that the amount of grease can be automatically matched according to the specification of a steel pipe, and the amount of grease is greatly saved.

The inner and outer protecting ring screwing robotic system is the middle system for petroleum pipe processing with a robotic because the service withinside the enterprise at present, that could substantially enhance the screwing overall performance of the protecting ring screwing process. It may be used with the internal and outer computerized oiling system and the internal and outer protecting ring computerized feeding tool to obtain the reason of unmanned manufacturing of the put up and successfully lessen hard work and running costs.

The robotic Protector Applier The Robotic Protector Applier system serves as the pivotal equipment in the octg Pipe industry with a robot as its carrier, significantly enhancing the screwing performance of the protection ring installation process. The pipe Protector Applier system seamlessly collaborates with both internal and external automatic oiling equipment, as well as automated loading and unloading devices for internal and external protector Applier, thereby achieving unmanned production capabilities while effectively reducing labor and operational costs.

External Water BlowingThe special air knife technology is used to make the compressed air evenly and annularly spray on the surface of the steel pipe thread, so as to blow off the emulsion and scrap iron on the surface of the internal or external thread, and it is equipped with a waste water recovery device.

The internal and outer shielding ring screwing robotic gadget is the center gadget for petroleum pipe processing with a robotic because the service withinside the enterprise at present, which could extensively enhance the screwing overall performance of the protecting ring screwing process.

 Desheng robot for Inner protective ring tightening:Model Specification of protective ring7 "/13"/20 "Maximum screwing torque200/400NMNumber of jaws5/6Screw connection form floating screw connectionClamping mode of protective ringexternal clamp or internal supportScrew connection distance tolerance of protective ring± 0.5mmThe inner and outer protective ring screwing robot equipment is the core equipment for petroleum pipe processing with a robot as the carrier in the industry at present, which can significantly improve the screwing performance of the protective r

The coupling pre-tightening robot grasps the coupling after off-line oiling and completes the pre-tightening of the coupling according to a preset program.

The system comprises a multi-joint robot, a code spraying device, a primer spraying device, a drying device, pipe end detection, a control system, a safety protection system, etc. It can automatically complete the identification of information on the inner and outer walls of steel pipes and can achieve the purpose of completely replacing manual work. The generated identification has a high definition, is not easy to fall off, and can be stored for a long time.

Desheng Inner protective ring tightening robot：This products are mainly equipment in the field of pipe processing, mainly including intelligent processing equipment for casing lines, intelligent processing equipment for optical pipes and intelligent processing equipment for coupling lines.Specification of Inner protective ring tightening robot：Model：protective ring7 "/13"/20 "Maximum screwing torque200/400NMNumber of jaws5/6Screw connection formfloating screw connectionClamping mode of protective ringexternal clamp or internal supportScrew connection distance tolerance

The coupling pre-tightening robot grasps the coupling after off-line oiling and completes the pre-tightening of the coupling according to a preset program. The coupling pre-tightening robot can effectively control the coupling pre-tightening parameters and can realize the functions of automatic measurement, automatic recording, storage, data uploading, and the like of the J value through the combined control with the screwing.

The coupling feeding robot device is mainly used for carrying the coupling or feeding and unloading the threading machine tool, which can obviously reduce the labor intensity of workers and effectively reduce the labor cost. Through the recognition of the 3D vision system, the coupling that can be carried is determined, and then the robot automatically grasps and loads the docking hoop without manual intervention.Specification：DSJS-7/13/20Coupling conveying specification: 7 "/13"/20 ";Number of jaws: 2 or 3;Clamping method of protective ring: internal support.

Outer Protective Ring Tightening RobotDeviceDescription/Instruction:The inner and outer protective ring screwing robot equipment is the core equipment for petroleum pipe processing with a robot as the carrier in the industry at present, which can significantly improve the screwing performance of the protective ring screwing process. It can be used with the inner and outer automatic oiling equipment and the inner and outer protective ring automatic feeding device to achieve the purpose of unmanned production of the post and effectively reducelabor and operating costs.

Inner Protective Ring Tightening RobotDevice:Description/Instruction:   The inner and outer protective ring screwing robot equipment is the core equipment for petroleum pipe processing with a robot as the carrier in the industry at present, which can significantly improve the screwing performance of the protective ring screwing process. It can be used with the inner and outer automatic oiling equipment and the inner and outer protective ring automatic feeding device to achieve the purpose of unmanned production of the post and effectively reduce labor and operating costs.

Coupling Pre-Tightening RobotThe coupling pre-tightening robot grasps the coupling after off-line oiling and completes the pre-tightening of the coupling according to a preset program. The coupling pre-tightening robot can effectively control the coupling pre-tightening parameters and can realize the functions of automatic measurement, automatic recording, storage, data uploading, and the like of the J value through the combined control with the screwing. It completely realizes the conversion of this robot to replace manual labor and achieves unmanned production.

OCTG Coupling Starter systemThe OCTG Coupling Starter system facilitates the secure gripping of the Coupling by the robot, allowing for offline oiling and executing pre-twisting of the Coupling according to a predetermined program.This Robotic Coupling Starter effectively regulates pre-screwing parameters, enabling integration with screwing control to achieve automatic J-value measurement, automated recording and storage, data upload, and other functionalities.It fully realizes the substitution of manual labor with robotic automation, enabling unmanned production.